In case you want to buy some, caulk is sold online and in home improvement stores. Remove the caulk if it is glued to the trim plate and the screws to the wall. You may find a layer of caulk around the edges of the trim plates. Soak the trim and the handle in vinegar to remove and make them look new once again. Keep it where you can find it when you will want to fix it back. Unscrew both sides of the trim plate and remove it from where it is secured to the wall. The reason is that you will need enough space to uninstall the old valve and installing the new one. If you can’t do it from the inside, go to the back of the bathroom and make a bigger hole. Check the opening in the wall to see if it is big enough. Pay attention while taking steps to replace a shower valve, so you don’t lose any parts in the process. Apart from the handle, use screwdrivers to remove the other parts of the showerhead. There are different models of showerheads, and each requires a different hex key. With the help of a hex, remove the handle of the shower head faucet. If there’s no other way of stopping the flow of water, cut off the main house source of water. Turn off both the hot and the cold water stops if the two are present. Water stops are usually at the right or left side of your valve cartridge. Some water stops use screws so you will need to use a screwdriver to turn them a little to the left. Find the handles that control the flow of water and turn them clockwise. The next step is to switch off the water flowing into the shower to prevent more leakage. Keep all removed parts and screws in one place to use them again when needed. Covering it also helps to prevent screws from falling off and getting lost. The first thing to do is cover the drain with a cloth while you fix the faulty valve.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |